Inflatable Hair Washing Basin

Designed for personal in-bed hair care needs, specifically for head, neck, and shoulder support. 

Customized design is welcomed.

INSTRUCTIONS:

1. Locate the inflation valves found on both the upper and lower portions of the basin. Inflate by mouth or with an air pump (air pump non included).

2. With the user laying flat gently place the basin under the user's head with their neck2resting gently in the outside opening.

3. Connect the larger end of the drain hose to the drain outlet on the underside of the basin. Be sure the drain hose is fully inserted until it cannot go in any further. Place the other end of the drain hose into a wastewater container. Be sure the wastewater container is positioned lower than the basin. Close the drain plug.

4. Wash the user's hair as usual

5. When finished shampooing, open the drain plug, and let all the wastewater completely drain from the basin.

6. Dry user's hair and remove the basin from underneath the user's head.

7. Rinse basin and wipe out any excess water.

8. Leave basin inflated for several hours until it is completely dry before deflating and folding for storage.